Add to ORKGLaboratory assessment of samples of burned lime produced in small experimental lime kiln in a traditional way. The samples were compared based on pore structure determined by MIP, surface area (BET), specific and bulk density (gas pycnometry) and composition determined by thermal analysis. In addition standard reactivity test was carried out and the samples were qualitatively described in SEM
It is known that limestone from different origins decomposed at same kiln conditions produce either...
The project was based on a design and construction of a lime kiln. The kiln was tested and described...
The white liquor preparation is one of the main purposes of the recovery cycle in a kraft pulp mill ...
A small scale lime kiln was designed and built in order to evaluate production of historic lime bind...
Prototype of a lime kiln has been developed in order to replicate production of selected lime binder...
The overburning test method was developed to simulate and predict lime densification, agglomeration,...
In this study, the relations between lime calcination kilns and the properties of the limes produced...
While there are various factors affecting lime quality, the quality of raw material, calcination tem...
At the institute of technology of building materials and components at the fakulty of civil engineer...
It is of utmost importance that the white liquor used in the digester of a sulphate pulp mill is of ...
This contribution reports preliminary results on the research activity performed on 25 carbonate roc...
The influence of the slaking method on the characteristics of lime putties has been investigated. Th...
This is a research report of the effects of process variables on the reactivity of slaked lime produ...
Lime was made by the calcination of limestone in a high pressure resistance furnace. The lime minera...
This study has examined the effects of limestone characteristics (microstructure and texture) and ca...
It is known that limestone from different origins decomposed at same kiln conditions produce either...
The project was based on a design and construction of a lime kiln. The kiln was tested and described...
The white liquor preparation is one of the main purposes of the recovery cycle in a kraft pulp mill ...
A small scale lime kiln was designed and built in order to evaluate production of historic lime bind...
Prototype of a lime kiln has been developed in order to replicate production of selected lime binder...
The overburning test method was developed to simulate and predict lime densification, agglomeration,...
In this study, the relations between lime calcination kilns and the properties of the limes produced...
While there are various factors affecting lime quality, the quality of raw material, calcination tem...
At the institute of technology of building materials and components at the fakulty of civil engineer...
It is of utmost importance that the white liquor used in the digester of a sulphate pulp mill is of ...
This contribution reports preliminary results on the research activity performed on 25 carbonate roc...
The influence of the slaking method on the characteristics of lime putties has been investigated. Th...
This is a research report of the effects of process variables on the reactivity of slaked lime produ...
Lime was made by the calcination of limestone in a high pressure resistance furnace. The lime minera...
This study has examined the effects of limestone characteristics (microstructure and texture) and ca...
It is known that limestone from different origins decomposed at same kiln conditions produce either...
The project was based on a design and construction of a lime kiln. The kiln was tested and described...
The white liquor preparation is one of the main purposes of the recovery cycle in a kraft pulp mill ...